REASONS YOUR WATER HEATER ISN'T FUNCTIONING

Reasons Your Water Heater Isn't Functioning

Reasons Your Water Heater Isn't Functioning

Blog Article

Visit Website

Almost everyone seems to have their own unique assumption on the subject of What Would Cause My Electric Water Heater to Stop Working?.


Hot Water Heater Repair
Several modern houses use an electrical water heater for their heater, as a result of its ease and simplicity of use. Nevertheless, much like any other electrical appliances, issues might emerge with its use, unexpectedly. It can be actually frustrating to wake up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm adequate or even too warm. Whatever the instance may be, water heater troubles can be fairly nerve-racking. The good news is, we've made a listing of possible services to your water heater issues. There are a number of elements that could cause many of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the primary power supply for security. Whatever the problem is, getting it repaired should not posture way too much of a concern if you comply with these steps:

Call A Professional:


If after replacing all malfunctioning parts and resetting your temperature level, the hot water heater still isn't functioning, you may need to contact an expert plumber for a specialist viewpoint. The problem with your heating system could be that the cold and hot taps have been changed or it may be undersized for the quantity of warm water needed in your home. Whatever the case might be, an expert plumber would help address the issue.

Inspect Your Power Supply:


As basic as this might appear, it is extremely necessary. Without ample power, your hot water heater will not function. So the first thing to do when your water instantly retires is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, just turn it on and off once again. Replace any kind of damaged or damaged fuse. Check the appliance with power after these modifications to see if it's now functioning.

Check Your Thermostat:


If your hot water heater still isn't working or the water coming out isn't warm enough, you might need to examine the temperature level settings on your top thermostat. Guarantee the breaker is switched off prior to doing anything. Open up the accessibility panel as well as press the red switch for temperature reset over the thermostat. This should assist warm the water. Turn the breaker back on and inspect if the trouble has been settled.

Check the Burner in the Hot Water Heater:


If it's not a power issue, after that try taking a look at your burner if it is still working. Check each of your heating elements to make sure the trouble isn't with any of them. If any of them is damaged, replace that part and afterwards check whether the hot water is back on.

Final thought


Hot water heater problems are not always significant. Most of them are due to small concerns like a blown fuse or worn-out heating element. Changing the damaged parts ought to suffice. Nonetheless, if you are still unable to fix the trouble, give a call to your local plumber to come to get it repaired.


Common Reasons Why Your Hot Water Heater Isn’t Working


Water Gets Too Hot


Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.



FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.


Water Doesn’t Get Hot


This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).



FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.


Leaking Water Heater


A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.



FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.


Noisy Water Heater


Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.



FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.


Pilot Light Keeps Going Out


Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.



FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.


Water Smells Bad


The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.



FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.


Water Looks Brown Or Rusted


The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)



FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/



As an enthusiastic person who reads on What Would Cause My Electric Water Heater to Stop Working?, I think sharing that piece of content was worthwhile. Enjoyed reading our blog? Please share it. Let others find it. Thank you so much for taking the time to read it.




Book Instantly

Report this page